Models
› Accessory Brackets
› Pistol Display Mount- Barrel Rod 45deg Front
Required parts - https://link.amazon/B03RbMfID
A universal pistol mount to mount a handgun to your OTW installation. This mount requires a 5mm brass rod, cut to your preferred length (at least half the length of the barrel) Once cut, press the rod into the star shaped hole and tap it to fully seat it. Affix to the wall with the anti-rotation insert and then slide the barrel of your pistol over the rod.
A universal pistol mount to mount a handgun to your OTW installation. This mount requires a 5mm brass rod, cut to your preferred length (at least half the length of the barrel) Once cut, press the rod into the star shaped hole and tap it to fully seat it. Affix to the wall with the anti-rotation insert and then slide the barrel of your pistol over the rod.
Print Settings
Layers & Quality
| Layer height | .2 mm |
Walls
| Wall loops | 6 |
Top/Bottom Shells
| Top shell layers | 6 layers |
| Bottom shell layers | 6 layers |
Infill
| Sparse infill density | 25% |
Support
| Enable support | Yes |
Shop for Filament
Search Amazon for the filament this model prints in. As an Amazon Associate we earn from qualifying purchases.
Comments
No comments yet
Sign in to join the conversation when comments launch.