Your cart is currently empty!
Categories
- 1"x3" Bracket System (11)
Category: 1″x3″ Bracket System
Brackets for use with 1″x3″ Lumber (0.75″x2.75″ Actual)
-
Definitely Not Just a Benchy
This file is a test file used to ensure that your printer works well. It was uploaded as a test of the file upload mechanism.
View: Definitely Not Just a Benchy3 downloads (11 MB) -
Definitely Not Just a Benchy
This file is a test file used to ensure that your printer works well. It was uploaded as a test of the file upload mechanism.
View: Definitely Not Just a Benchy5 downloads (11 MB) -
Accessory Bracket – Hook – Set v1
This is the hook style accessory bracket. The package contains the main hook body, anti-rotation insert, hook body with dovetail face and removable face plate with blank faces for easy customization. Print at 60% infill with 6 walls or better.
View: Accessory Bracket – Hook – Set v16 downloads (218 KB) -
Accessory Bracket – Clip – Set v1
This is the clip style accessory bracket. The package contains the basic clip and a clip with removable face plate. Both modules contain an blank face for easy customization. Print at 60% infill with 5 walls or greater.
View: Accessory Bracket – Clip – Set v16 downloads (196 KB) -
1×3 double main body wall bracket
This is a combination of 2 main body brackets compatible with the 1×3 system. Used to expand the bracket system vertically and provide greater strength than a series of single brackets. Print at 60% infill with 5 walls or greater.
View: 1×3 double main body wall bracket4 downloads (380 KB) -
1×3 Single Body and Shoe Wall Bracket
This is the single wall bracket compatible with 1×3 boards used to close out the bottom of the bracket system. Print at 60% infill with 5 walls or greater.
View: 1×3 Single Body and Shoe Wall Bracket6 downloads (363 KB) -
1×3 Single Main Body wall Bracket
This is the single main body bracket used with 1×3 lumber to expand the bracket system vertically. It includes a horizontal channel to run cabling. Mount via adhesive to a movable panel or directly to a wall. Print at 60% infill with 5 walls or greater.
View: 1×3 Single Main Body wall Bracket6 downloads (202 KB) -
1×3 Cap wall Bracket
This is the top bracket for your wall column used to close out the series of brackets. Mount via adhesive to a movable panel or directly to a wall. Print at 60% infill with 5 walls or greater.
View: 1×3 Cap wall Bracket5 downloads (38 KB) -
1×3 Cap with Single Body wall bracket
This is a main wall bracket body with integrated cap for use with 1×3 lumber. Print at 60% infill with 5 walls or greater.
View: 1×3 Cap with Single Body wall bracket7 downloads (206 KB) -
1×3 Drilling Jig
This is the board drilling jig for use with the V8 bracket system. Print at 60% infill with 5 walls or greater.
View: 1×3 Drilling Jig4 downloads (85 KB) -
1×3 Shoe Bracket
This is the shoe bracket for your wall column used to close out the series of brackets and is compatible with 1×3″ lumber panels. It includes a horizontal channel to run cabling. Mount via adhesive to a movable panel or directly to a wall. Print at 60% infill with 5 walls or greater.
View: 1×3 Shoe Bracket5 downloads (190 KB)